Setting the input mode, P. 83, P. 83)) – Edirol PC-80 User Manual

Page 83

Using the PC-80 as an audio interface

You need to select the Input Mode that is appropriate for the device you’ve connected to the
audio input jacks; either Line, Guitar, or Mic.

fig.util*

Simultaneously press the

MIDI CH

button and

PGM CHANGE

button,

and hold them down for a few moments.

The PC-80’s display will indicate “UTL,” and you will be in Utility
mode.

Press the

[INPUT MODE]

key on the keyboard.

Use the

VALUE encoder

or the [0]–[2] keys of the keyboard to choose the setting that’s

appropriate for the device you’ve connected to the audio input jacks.

fig.enter

Press the ENTER button.

* If you press any other button without pressing the ENTER button, the setting you made will

be discarded.

Setting the Input Mode

Key

Indication

Setting

Explanation

LINE

Choose this if a MIDI sound module or other analog audio device
is connected

GUITAR

Choose this if a guitar is connected

MIC

Choose this if a dynamic mic is connected

* The PC-80 is not compatible with the miniature mics (condenser mics)

sometimes included with a computer or sound card.

PC-80_e.book 83 ページ２００５年１１月１０日　木曜日　午前１１時３４分