Edirol PC-80 - Manual (Page 16)

16
Installation and settings (Windows)
In order to use the PC-80, you’ll need to install both the driver and the PC-80
software synthesizer.
1
Start up Windows with the PC-80 disconnected.
Log on to Windows using a user name that has administrative privileges
(such as Administrator).
2
Open the System Properties dialog box.
1. From the Windows start menu, choose Control Panel .
2. In “Pick a category,” click Performance and Maintenance .
3. In “or pick a Control Panel icon,” click the System icon.
fig.signature
3
Click the Hardware tab, then click [Driver
Signing] .
The Driver Signing Options dialog box
will open.
4
In the Driver Signing Options dialog box, make sure that “Ignore” is
selected.
If “Ignore” is selected, simply click [OK] . If this is not set to “Ignore,” make
a note of the current setting (“Warn” or “Block”), change the setting to
“Ignore , ” then click [OK]
Installing the driver
Windows XP users
The procedure for installation and settings will differ depending on your system.
Proceed to the appropriate section for your system.
• Windows XP users ................................................................... (p. 16)
• Windows 2000 users ................................................................ (p. 21)
Depending on your setup,
the System icon may
appear directly in the
Control Panel
(Classic
view). If so, double-click
the System icon.
If you’ve changed the
“Driver Signing
Options ,” return the
setting to its original state
after you’ve finished
installing the driver.
PC-80_e.book 16 ページ ２００５年１１月１０日 木曜日 午前１１時３４分