Macintosh users – Edirol PC-80 User Manual
Page 102
102
PC-80 driver settings
1
Use the USB cable to connect the PC-80 to your computer.
2
Turn on the PC-80’s power switch.
3
Open
“System Preferences”
and click
“Sound”
.
4
In the
Sound Effects
tab, set
“Play alerts and sound effects through”
to
“EDIROL PC-80 44.1 kHz”
.
* If you don’t want alerts to be played through the PC-80, choose
“Internal
speakers”
for the
“Play alerts and sound effects through”
setting.
5
In the
Output
tab, set
“Choose a device for sound output”
to
“EDIROL
PC-80 44.1 kHz”
.
6
In the
Input
tab, set
“Choose a device for sound input”
to
“EDIROL PC-
80 44.1 kHz”
.
7
Open the
Applications
folder of your Macintosh hard disk. In the
Utilities
folder, double-click
Audio MIDI Setup
to open the
Audio MIDI Setup
.
fig.osx2a-e
8
Click the
MIDI Devices
tab.
9
Click
Add Device
four times.
Four new external MIDI devices will appear.
Macintosh users
In order to make device
settings, you’ll first have to
install the driver.
Although “44.1 kHz” is used
for the purpose of explanation
within this document, this
changes depending on the
actual setting of the SAMPLE
RATE SETTING
on your PC-
80.
This unit is equipped with
a protection circuit. A brief
interval (a few seconds)
after connecting USB cable
is required before the unit
will operate normally.
8
10
9
Click MIDI Devices
Click Add Device
Click Show Info
PC-80_e.book 102 ページ ２００５年１１月１０日 木曜日 午前１１時３４分