Epson 300 - Manual (Page 54)

Transporting the Printer
To transport your printer, carefully repack it using the original
box and packing materials as follows:
1. Open the printer cover and make sure the print head is
positioned at the far right of the printer. If not, turn on the
printer and wait until the print head returns to the far right
position. Turn off the printer and close the printer cover.
c
Caution:
Leave the ink cartridge installed when you transport the
printer. Removing the cartridge during transport can
damage the printer.
2. Unplug the power cord from the electrical outlet; then
disconnect the interface cable from the printer.
3. Remove the paper from the sheet feeder and the paper path;
then remove the paper support.
4. Attach the protective materials to the printer.
5. Repack the printer in the original box.
6. Keep the printer flat in the box during transport.
L
Hudson ++ Ref. Guide
Rev.d
A5 size Chapter 5
04-28-98 DR, pass 2
5-10 Maintenance and Transportation