Epson 300 - Manual (Page 25)

7. Press the ink cartridge clamp down until it locks in place.
c
Caution:
Once you install the ink cartridge, do not open the clamp
again until you replace the ink cartridge. Otherwise, the
cartridge may become unusable.
8. Press the
T
cleaning button. The printer moves the print
head to its home (far right) position.
Note:
Even if you do not press the
T
cleaning button, the printer
moves the print head unit back to its home position about
60 seconds after you install the ink cartridge.
The printer charges the ink delivery system. This operation
takes a few minutes the first time you install the ink
cartridge.
c
Caution:
During the ink charging process, the
P
power light
flashes. Never turn off the printer while the
P
power light
is flashing; this can result in incomplete charging of
printer ink.
13
2
R
Hudson++ Ref. Guide
Rev.d
A5 size Chapter 2
05-6-98 DR, pass 5
Setting Up the Printer 2-9