Epson 300 User Manual
Page 47
3. Hold down the
T
cleaning button for three seconds. The
P
power light begins flashing, and the print head moves
left slightly to the cartridge replacement position.
c
Caution:
Do not move the print head by hand. Always use the
T
cleaning button to move it. Otherwise you may damage
the printer.
Note:
❑
If you press the
T
cleaning button for three seconds when
the
V
ink out light is off, the printer starts cleaning the print
head.
❑
The print head automatically returns to the home (far right)
position after about 60 seconds if you don’t begin the
installation procedure.
4. Lift up the ink cartridge clamp as far as it will go. When
you do, the cartridge will rise partly out of the ink cartridge
holder.
c
Caution:
Once you open the ink cartridge clamp, the ink cartridge
becomes unusable and cannot be reinstalled even if ink
remains. Otherwise, it may damage the printer or cause
the ink level sensor to malfunction.
clamp
24
5
R
Hudson ++ Ref. Guide
Rev.d
A5 size
Chapter 5
04-28-98
DR, pass 2
Maintenance and Transportation
5-3