Eaton Electrical SPI9000 - Manual (Page 80)

SPI9000 Inverter Unit FI9 – FI14 User Manual
5-28 For more information visit: www.EatonElectrical.com MN04004002E
September 2006
Trip Counters
Trip counters (menu S6.8.2) are counters the values of which can be reset i.e. restored to
zero. You can use the following resettable counters:
Note: The trip counters run only when the motor is running.
Table 5-12: Resettable Counters
The counters can be reset on pages 6.8.2.2 (Clear MWh counter) and 6.8.2.5 (Clear Operation
time counter).
Example: When you want to reset the operation counters, see Figure 5-26.
Figure 5-26: Counter Reset
Software (S6.8.3)
The Software information page includes information on the following inverter software
related topics:
Table 5-13: Software Information Pages
Page Counter
T6.8.2.1 MWh counter
T6.8.2.3 Operation day counter
T6.8.2.4 Operation hour counter
Page Counter
6.8.3.1 Software packages
6.8.3.2 System software version
6.8.3.3 Firmware interface
6.8.3.4 System load
Clr Optime cntr Trip counters
T1 T5
56.8.2 P6.8.2.5
Not reset
Clr Optime cntr
P6.8.2.5
Not reset
Clr Optime cntr
P6.8.2.5
Reset
Clr Optime cntr
P6.8.2.5
Reset
Clr Optime cntr
P6.8.2.5
Not reset