Eaton Electrical SPI9000 - Manual (Page 67)

SPI9000 Inverter Unit FI9 – FI14 User Manual
MN04004002E For more information visit: www.EatonElectrical.com 5-15
September 2006
Table 5-10: System Menu Functions
Code Function Min Max Unit Default Cust Selections
S6.1 Selection of
language English English
Deutsch
Suomi
Svenska
Italiano
S6.2 Application
selection Basic
Application Basic Application
Standard Application
Local/Remote control Appl.
Multi-Step Application
PID Control Application
Multi-Purpose Control Appl.
Pump and Fan Control Appl.
S6.3 Copy parameters
S6.3.1 Parameter sets Load factory defaults
Store set 1
Load set 1
Store set 2
Load set 2
S6.3.2 Load to keypad All parameters
S6.3.3 Load from keypad All parameters
All but motor parameters
Application parameters
P6.3.4 Parameter backup Yes No
Yes
S6.4 Parameter
comparison
S6.5 Safety
S6.5.1 Password Not used 0=Not used
P6.5.2 Parameter locking Change
Enabled Change Enabled
Change Disabled
S6.5.3 Start-Up Wizard No
Yes
S6.5.4 Multimonitoring
items Change
Enabled Change Enabled
Change Disabled
S6.6 Keypad settings
P6.6.1 Default page
P6.6.2 Default page/OM
P6.6.3 Timeout time 0 65535 s 30
P6.6.4 Contrast 0 31 18
P6.6.5 Backlight time Always 65535 min 10
S6.7 Hardware settings
P6.7.1 Internal brake
resistor Connected Not connected
Connected
P6.7.2 Fan control function Continuous Continuous
Temperature
P6.7.3 HMI acknowledge. 200 5000 ms 200
P6.7.4 HMI: no. of retries 1 10 5