Eclipse - Fujitsu Ten CD8454 - Manual (Page 73)

73
How to operate the MP3/WMA player
Listening to MP3/WMA file
Press the [DISC] button to switch to the CD player mode. 1
This starts MP3/WMA file play.
Disc mode from CD player ➔ Memory Stick player in order
each time the button is pressed.
If an external CD changer is connected, each additional press
of the [DISC] button will switch modes from CD changer 1 ➔
CD changer 2 ➔ Memory Stick player ➔ CD player.
A changer or player with no discs loaded will be skipped.
•Playback may be intermittent when there is a scratch on a CD
or when the recorded side is dirty.
•Only two external CD changers may be connected.
Caution
Note
•When music data recorded in the normal way (CD-DA) is
present on the same disc with MP3/WMA music files, the
normally recorded music data will be played. To listen to the
MP3/WMA music files, press button [3] for more than one
second.
•When a not corresponding for MP3/WMA file is played, "NO
SUPPORT" will appear.
[DISC] button
Button [3]