Eclipse - Fujitsu Ten CD8454 - Manual (Page 121)

121
How to operate the Sound Adjustment Mode
Operations during Pro Mode
Turn the [SEL] button to select a setting item. 3
When the button is turned, the setting item changes in the
following order and the selected item is highlighted.
Press the [SOUND] button. 1
The mode will switch to sound adjustment mode (normal
mode).
Press the [SOUND] button for more than five seconds. 2
The mode switches between normal mode and pro mode each
time the button is pressed. During pro mode, "PRO MODE ON"
and the scroll display appear in the display.
PEQ
Time Alignment
X-Over
Harmonizer
Non-F Phase
ATTENTION
•If the vehicle is equipped with a 3-way speaker system, do not
change from pro mode to normal mode. Doing so may cause
damage to the speakers.
•If you press the [SOUND] button during sound adjustment
mode, the adjustment mode is canceled and the mode returns
to normal music mode.
[SEL] button
[SOUND] button
Caution
When switching between Normal Mode and Pro Mode, please
make sure that the volume level is set to 0.