Eclipse - Fujitsu Ten CD8454 - Manual (Page 134)

134
How to operate the Sound Adjustment Mode
[FUNC] button
[SEL] button
[RTN] button
Writing/reading sound quality data
The sound quality data for the deck can be saved on a Memory
Stick. This data can be used to adjust the sound quality using
E-iSERV (web site).
Insert the Memory Stick to be used for writing the
sound quality data.
Press the [FUNC] button.
The function mode is activated.
Turn the [SEL] button to select the Memory Stick.
The selection item is highlighted.
Press the [SEL] button.
The Memory Stick setting mode is activated.
Turn the [SEL] button to select the Data Write.
The selection item is highlighted.
Press the [SEL] button.
Insert the memory stick to be used for saving the data.
The data will be written to the Memory Stick. [Writing] will
flash on the display while the data is being written. When
writing has finished, [Completed] will appear on the display
and then it will return to the display for selecting the
Memory Stick setting mode.
6
5
4
3
2
1
Writing sound quality data