Parametric equalizer adjustment (peq) – Eclipse - Fujitsu Ten CD8454 User Manual

Page 122

122

How to operate the Sound Adjustment Mode

There are 10 Mid & Hi-Frequency locations (5 + 5) available for
the parametric equalizer.
The Parametric Equalizer is divided into two groups Mid & Hi.
Any frequency assigned is highlighted in White, and is
unavailable for use elsewhere.
Bands selected are grayed out in the diagram to show how
they are in use and otherwise unavailable for reuse.
Bands in black are unused (available) and can be assigned to
within their respective bands (Mid or Hi parametric locations).

Mid-Band (Group-1) Parametric adjustment in 5-Bands of 25
Frequencies.
Hi-Band (Group-2) Parametric adjustment in 5-Bands of 20
Frequencies.
Eclipse has by default assigned arbitrary frequencies for each
of the 5-Bands (Hi/Mid for 10 parametric bands total).

Example: If you want the Hi-Group H-1 location to have a
parametric frequency of 1.25kHz.
Because this frequency is in use by M-5 you must first assign
M5 a new frequency, this will release the band for use in the
Hi-Group H1 at 1.25kHz.

Parametric equalizer adjustment (PEQ)

ATTENTION

Frequencies in each group (Mid-Group or Hi-Group) cannot be
duplicated (repeated).
Release a frequency from its location, before it can be re-
assignment (available again for use in another band).

Mid Group

Hi-Group

100

125

160

200

250

315

400

500

630

800

1.0k

1.25k

1.6k

2.0k

2.5k

3.15k

4.0k

5.0k

6.3k

8.0k

10k

12.5k

16k

200

250

315

400

500

630

800