Eclipse - Fujitsu Ten CD8454 - Manual (Page 68)

68
How to operate the CD player
Changing the number of CD titles
Press the [FUNC] button for less than one second while
in the disc mode.
1
Turn the [SEL] button to select Memory Func. 2
Press the [SEL] button. 3
Turn the [SEL] button to select an address from A to E. 4
The selected item will be highlighted.
The mode will change to memory allocation address selection
mode.
The number of CD titles that can be set can be changed by
changing the memory allocation. The number of CD titles is fixed for
each pattern and the number of tuner bands that can be recorded is
also changed at the same time.
The patterns switches between the following. The characters
for the selected item are highlighted and the memory allocation
address changes.
MEMORY A (standard)
AM/FM: 1/3,
CD title memory: 30 titles
MEMORY B AM/FM: 2/5,
CD title memory: 40 titles
MEMORY C AM/FM: 1/3,
CD title memory: 60 titles
MEMORY D AM/FM: 2/5,
CD title memory: 80 titles
MEMORY E AM/FM: 3/8,
CD title memory: 100 titles
Press the [RTN] button. 5
Press the [FUNC] or [RTN] button to exit function mode. 6
At this time, other adjustments can also be made in function
mode.
[FUNC] button
[SEL] button
[RTN] button