Eclipse - Fujitsu Ten CD8454 - Manual (Page 139)

139
How to use the NOB remote control
[MUTE] button
Muting the volume
Press the [MUTE] button for more than one second to cut the
volume or restore it instantly.
ATTENTION
Press the [MUTE] button for more than one second if E-COM is
connected and less than one second if E-COM is not connected
to cut the volume or restore it instantly.
DISC
BAND MODE
MUTE
ILLUMI
PWR E-COM
TRACK
TUNE SEEK
PU SH-MOD E
[PWR] button
Remote-control
light receptor
[AUDIO
CONTROL]
button
Turning the power on/off
Press the [PWR] button. 1
The power turns on or off each time the button is pressed.
When the power is turned on, the state used when the power was
turned off such as CD and tuner playing is restored.
Adjusting the audio volume
Press the [AUDIO CONTROL] button, and turn it to the
left or right.
1
Each press of the button will switch the audio control modes.
Turn to the right: Increases the volume.
Turn to the left:
Decreases the volume.
ATTENTION
When the main unit is shut down, the remote control will not work.