Eclipse - Fujitsu Ten CD8454 - Manual (Page 66)

66
How to operate the CD player
Changing a previously set title
Press the [FUNC] button for less than one second while
in the disc mode.
1
Press either [SEL] or [FAST ] button to move the cursor
to the position in the title for inserting or changing
characters.
4
[SEL] button: Moves the cursor to the right.
[FAST ] button: Advances the cursor to the left.
Turn the [SEL] button to the left or right to select
characters. 5
Turn to the right: Advances the character forward in its type.
Turn to the left:
Moves the character backward in its type.
If external CD changers are connected, a previously set title for a CD
will be changed in the same way. It is assumed here that the disc
mode is selected.
Turn the [SEL] button to select Title. 2
The disc title setting mode is activated.
Press the [SEL] button. 3
ATTENTION
To leave a space blank, follow these steps.
1.Select and flash the space to be blank.
2.Turn the [SEL] button to make a blank space flashing.
3.Press the [SEL] button to move.
The selected item will be highlighted.
Press the [RTN] button. 6
Press the [FUNC] or [RTN] button to exit function mode. 7
At this time, other adjustments can also be made in function
mode.
[SEL] button
[FAST ] button [FUNC] button [RTN] button