Ericsson STYLUS PRO 4900 - Manual (Page 148)

150
150 | Solving Problems
PAPER LOAD ERROR
PRESS THE BUTTON
AND REMOVE THE
JAMMED PAPER
Paper has jammed in the
printer. Press the button and remove the
jammed paper; see page 160 for more
information.
PAPER LOAD ERROR
PRESS THE BUTTON
AND RESET ROLL PAPER
Paper has jammed in the
printer. Press the button and remove the
jammed paper; see page 160 for more
information.
PAPER LOW The paper roll is almost
finished. Replace the roll.
PAPER OUT
LOAD PAPER
No paper is loaded. Load paper.
The button has been
pressed with no paper loaded.
Press the button, then load paper.
Paper ran out during printing. Press the button and remove the roll
paper core. Then load another roll.
PAPER SENSOR ERROR
PRESS THE BUTTON
LOAD DIFFERENT PAPER
The paper is not detected. Press to clear the error, then select
the right paper.
PAPER SETTING ERROR
CHECK THE PAPER SOURCE
IN YOUR DRIVER SETTINGS
OR RELOAD PAPER
CORRECTLY
The paper source selected in
the printer driver and the
control panel do not match. Check the Paper Source or Paper Size
settings and make sure the paper is loaded
correctly.
PAPER SETTING ERROR
THIS PAPER CANNOT BE
LOADED FROM PAPER
CASSETTE
INSERT PAPER LESS THAN
8 MM THICKNESS FROM
REAR MANUAL FEEDER
The wrong paper is loaded in
the paper cassette. Remove the paper from the paper cassette
and feed it manually into the front or rear
paper feeder.
PAPER SETTING ERROR
ROLL PAPER IS LOADED
REMOVE IT AND CHANGE
PAPER SOURCE SETTING
TO ROLL PAPER
The paper source selected in
the printer driver and the
control panel do not match. Check the Paper Source or Paper Size
settings and make sure the paper is loaded
correctly.
PAPER SIZE ERROR
LOAD CORRECT PAPER SIZE
The loaded paper size does not
match the size of the image. Make sure the paper size matches the size
of the image.
Message Explanation Response