Casio PL-40R 2 - Manual (Page 48)

Keyboard Settings
E-80
* Whenever you turn on Accomp MIDI Out, the MIDI Tx setting becomes Group A and a message appears asking if you want to
make the settings (initial defaults, etc.) required for each part.
Chord5 1 to 16, Off
Group B Part1 1 to 16, Off
∼
″
Part16 1 to 16, Off
MIDI Receive
Channel
(MIDI Rx Ch) Part1 1 to 16, Off Specifies whether MIDI messages are received for Group
B parts of this piano, and the receive channel for Group B
parts.
∼
″
Part16 1 to 16, Off
Setting: System
Main Menu Sub Menu Settings Description
System DSP Volume 0 to 127 Adjusts the volume of the part to which effect DSP is
being applied. This volume setting is multiplied by the
mixer Volume setting.
DSP Pan –64 to 63 Adjusts the pan (stereo position) of the part to which
effect DSP is being applied.
DSP Reverb Send
(DSP RevSend) 0 to 127 Adjusts the reverb send of the part to which effect DSP is
being applied. The mixer Mode reverb send setting is
disabled.
DSP Chorus Send
(DSP ChoSend) 0 to 127 Adjusts the chorus send of the part to which effect DSP is
being applied. The mixer Mode chorus send setting is
disabled.
Total Master
Volume
(Total M.Volume) 0 to 127 Adjusts overall piano volume.
Total Master Pan
(Total M.Pan) –64 to 63 Adjusts overall piano pan (stereo position).
Main Menu Sub Menu Settings Description
426-E-082A
PL40NE01-1.book 80 ページ ２００２年７月２３日 火曜日 午後６時５２分