Casio PL-40R 2 User Manual
Page 29
E-61
Using the Sequencer
The following are global settings you can configure and operations you can perform for recording with the sequencer.
1
Song selection
2
Recording track
3
Quantize execute
4
Meter
5
Metronome setting
6
Song name
7
Track delete
8
Song delete
9
All song delete
1.
Press the SEQUENCER button once.
This causes the button’s indicator lamp to light, indicating that sequencer is turned on.
2.
Select the user song area that contains the song whose global settings you want to change.
Use the [+] and [–] buttons or the selector dial to select the song area (Song 1~10).
After a few seconds, the display changes to the play standby. You can also display the play standby by pressing the
EXIT/NO button.
3.
Press the SEQUENCER button to display a main menu, and then use the [
] and [
] buttons to display the
item whose setting you want to change.
To display the “Delete” sub menu, first display the “Delete” main menu, and then press the ENTER/YES button.
The numbers to the right of the sample displays below correspond to the following sections that provide details on each
setting.
4.
When the item you want is on the screen, change it to the setting you want.
See the explanations following this procedure for details on making each setting.
5.
After the settings are the way you want, press the SEQUENCER button or the EXIT/NO button.
This returns to the sequencer play standby screen.
Configuring Global Recording Settings and Operations
To make global settings
426-E-063A
PL40NE01-1.book 61 ページ ２００２年７月２３日 火曜日 午後６時５２分