Epson I+ User Manual
Page 99
Type the number of the item you wish to add and press
Enter.
That
item
disappears from the Additional DEVICE LIST on the screen.
You can add as many devices as necessary. When you finish adding
devices, press
0 and Enter
to return to the Modify DEVICE LIST menu.
Note: Even if you have both monochrome and color monitor video cards
installed, you can only test the monitor that is currently selected by
DIP switches 1-5 and 1-6 on the front panel.
To remove a device from the list, press
2
and Enter.
The screen displays
the current DEVICE LIST and the prompt:
Enter the number of the item to delete:
Type the number of the item you wish to delete and press
Enter.
That item
disappears from the DEVICE LIST on the screen. You can delete as many
devices as necessary. When you finish deleting items, press
0
and
Enter
to
return to the Modify DEVICE LIST menu.
When you finish modifying the DEVICE LIST, press 0 and then
Enter.
The screen displays the modified DEVICE LIST for a final check. If the list is
correct, press
Y
and
Enter.
You are now ready to select a test.
Selecting a test
From the DEVICE LIST, select the device to be tested. Type the num-
ber of the device, then press
Enter.
Before the test begins, you are asked how many times to perform the
test. You see this menu:
Number of times to test device
l - Run test one time
2 - Run test multiple times
0 - Exit
Enter selection number:
5-4