Epson I+ - Manual (Page 18)

2. Insert the keyboard connector as shown in Figure 1-7. Do not force the
connector, but make sure you insert it all the way. See that the cable exits
to the right of the main unit.
Figure
1-7. Connecting
the
cable to the main
unit
3. Gently push the cable into the retaining clip, and close the cover.
You can use the keyboard at different angles such as laying it flat on a
desk or placing it on your lap. You can also tilt the keyboard by adjusting the
legs on the bottom. Adjust the keyboard legs by turning the keyboard over,
reaching under the lip and pulling each of the legs upward until they lock
into place, as shown in Figure 1-8.
1-9