Floppy disk drives and controller check – Epson I+ User Manual
Page 113
Sync check
This test is provided for service purposes only. If you accidentally select
this option, press any key to end the test.
Run all above checks
To run all the tests on the menu in sequence, press
11
and
Enter.
When you choose this option, all checks for the color adapter and CRT
are performed automatically in sequential order. Although you do not start
each test, you must still supply the appropriate responses to progress from
one test to the next.
Floppy Disk Drives and Controller Check
Use this option to test the performance of the floppy disk drives installed
in your computer. This test includes several checks that allow you to identify
particular problems related to your floppy disk drives.
Before running these tests, format a floppy disk to use for the tests that
write data on the disk in the drive. In a 360KB drive, you can only use a
360KB floppy disk. In a 720KB drive, use only a 720KB diskette.
You can select the individual tests from this menu:
FLOPPY DISK DRIVE(S) AND CONTROLLER CHECK MENU
1
- Sequential seek check
2
- Random seek check
3 - Write, read check
4
- Speed check
5
- Run all above checks
0 - Exit
Enter selection number:
Before any checks are performed, the program determines the number
of floppy disk drives installed in your computer. If you have more than one
drive, you see this prompt each time you select a test:
Check which drive (A/B)?
5-18