Epson I+ User Manual
Page 42
2.
The back panel is secured with three screws as shown in Figure 3-1.
Remove the screws and put them to one side. Slip the back panel off the
main unit.
3.
Figure 3-1. Back panel screws
The top cover is secured by two screws on each side of the computer as
shown in Figure 3-2. The two screws on the left side of the unit are
covered by small plastic inserts. Gently remove the inserts with a small
screwdriver, then remove the screws on both sides of the computer. Put
the screws and inserts safely to one side.
Figure 3-2. Side screws under plastic inserts
3-2