Casio EM-500 Mobile E-mailer V.1.0 - Manual (Page 14)

Mobile E-mailer User's Guide -Page 14 -
NOTE
You can also set dial properties while configuring a new service or changing an
existing service. On the Phone Number screen that appears in step 7 of the
procedure under “Configuring a New Mail Service,” tap the Dial Properties
button to display the same screen as that in the above procedure. Make the
settings you want and then tap OK top continue with the new service
configuration procedure.
Configuring Your Modem
The required modem configuration depends on the modem you are using, the type of
telephone circuit to which you are connected, and the requirements of your ISP. Use the
following procedure to change the configuration of your modem.
To change the configuration of your modem
1. On the Modem screen that appears in step 8 of the procedure under
“Configuring a New Mail Service,” tap the Connection Properties
button.
l This displays the Connection Properties screen.
2. On the Port Settings tab, make the settings required to connect to your
ISP's access point. Set the Baud Rate to a value that is within the range
supported by your ISP's access point.
3. The settings you can make with the Call Options tab depend on the
type of telephone circuit you are connecting through, and on the type of
modem you are using. For proper operation, some modems may require
input of a character string commands in the Extra dial-string modem
commands box.