Casio EX-FR10 (Camera: Ver. 1.00 and 1.01, Controller: Ver. 1.00) - Manual (Page 69)

69
Other Settings (Set Up)
Procedure
* MENU * Setup * Language
.
Specify the display language you want.
1.
On the menu screen, touch “Setup”.
2.
Touch “Language”.
3.
Flick upwards and downwards until you find
the language you want, and then touch to
select it.
• Camera models sold in certain geographic areas may not support display language
selection.
Procedure
* MENU * Setup * Format
If a memory card is loaded in the camera, this operation will format the memory card.
It will format built-in memory if no memory card is loaded.
• The format operation will delete all contents on the memory card or in built-in
memory. It cannot be undone. Make sure you do not need any data currently on
the card or in built-in memory before you format it.
• Formatting built-in memory or a memory card will delete all protected images
stored there.
• Check the battery level before starting a format operation and make sure it is not
too low. Formatting may not be performed correctly and the camera may stop
operating normally if the camera powers down while formatting is in progress.
Specifying the Display Language (Language)
Formatting Built-in Memory or a Memory Card (Format)