Casio EX-FR10 (Camera: Ver. 1.00 and 1.01, Controller: Ver. 1.00) - Manual (Page 63)

63
Connecting the Camera with a Smartphone
(Wireless LAN)
NOTE
• Note that after changing the SSID and password on the camera, you will also need
to change the Wi-Fi settings of the smartphone.
• If you forget your camera SSID and password, you can perform the procedure
below to return them to their initial defaults.
1 Turn off the camera.
2 While holding down [0] (Movie) and the shutter button on the camera, hold
down [p] (Power) for about six seconds.
The process is complete when the operation lamp flashes amber for about
5 seconds.
IMPORTANT!
• Note that the wireless LAN connection between the camera and smartphone is
maintained even while the EXILIM Link app is not running on the smartphone or
when the app is running in the background. Leaving a wireless LAN connection in
effect will shorten camera battery life and cause the camera to become warm. Shut
down the EXILIM Link app and turn off the camera to terminate the wireless LAN
connection whenever you are not using it.
• Using the smartphone’s Wi-Fi setting screen to terminate a wireless LAN
connection will cause the camera to enter connection standby. If no connection is
established within three minutes, the camera will shut off automatically.