Casio EX-FR10 (Camera: Ver. 1.00 and 1.01, Controller: Ver. 1.00) - Manual (Page 37)

37
Recording Images
.
To stop an Interval Snapshot operation
1.
On the controller, press any button to recover from the sleep state.
2.
Touch “Exit”.
This stops the Interval Snapshot operation.
.
To shoot images manually during an Interval Snapshot operation
Pressing the shutter button on the camera during an Interval Snapshot operation will
shoot a snapshot. Pressing [0] (Movie) on the camera will record a five-second
movie.
NOTE
• Nothing is displayed on the monitor screen during an Interval Snapshot operation.
• Interval Snapshot images are shot using Auto Focus.
• Camera image stabilization is applied during movie recording by an Interval
Snapshot operation. Note, however, that image stabilization does not prevent
image blur due to subject movement.
• The current shooting setup, including zoom, cannot be changed while an Interval
Snapshot operation is in progress. A snapshot can be recorded with camera
operations only, and not by operating the controller.
• If the camera battery goes dead during an Interval Snapshot operation, the
operation will terminate. The controller battery going dead does not affect an
ongoing Interval Snapshot operation. To stop the Interval Snapshot operation in
this case, hold down [p] (Power) on the camera.
• If you are performing manual camera operations when the Interval Snapshot
operation reaches a shooting interval, Interval Snapshot recording for that interval
will be skipped.