Casio EX-FR10 (Camera: Ver. 1.00 and 1.01, Controller: Ver. 1.00) - Manual (Page 62)

62
Connecting the Camera with a Smartphone
(Wireless LAN)
When establishing a wireless connection between the camera and smartphone for
the first time, make sure to change the SSID and password as shown below. At the
time of purchase, the default SSID and password settings are the same for all
models. Using this model without changing the SSID and password may result in
mistaken connections with other devices in the same location as well as allow others
access to private information such as images.
• This step is required only once when you use this unit for the first time.
1.
If the camera is on, hold down [p] (Power) to turn it off.
2.
On the camera, hold down [0] (Movie) as you hold down [p] (Power)
until the camera’s operation lamp flashes green.
This will enable connection with a smartphone.
• While the camera is connected with a smartphone, its shutter button and [
0
]
(Movie) button are disabled.
3.
For the smartphone Wi-Fi setting, input the camera SSID and
password.
This will connect the smartphone to the camera.
• The initial default SSID and password settings are shown below.
SSID: FR10 Camera
Password: 00000000
• What you need to do to establish a wireless LAN connection depends on the
type of smartphone you are using. For details about how to establish a wireless
LAN connection see the user documentation that comes with your smartphone.
4.
On your smartphone, start up the EXILIM Link app.
5.
On the smartphone, tap “Connection Starting”.
This will connect the smartphone to the camera, which is indicated by the
camera’s operation lamp lighting green.
• If this is the first time you started up the app, its terms of use will appear on
your smartphone. Read the terms and then tap “Agree”.
6.
Tap “ ”
7.
Enter the new SSID and password.
• For the SSID and password, enter from eight to
32 single-byte characters and symbols.
8.
Tap “OK”.
The new SSID and password will become effective the
next time you turn on the camera.
Change SSID and password before using wireless LAN