Casio EX-FR10 (Camera: Ver. 1.00 and 1.01, Controller: Ver. 1.00) - Manual (Page 14)

14
Quick Start Basics
2.
Remove the hinge unit from the camera.
.
To attach the hinge unit to the camera
1.
Align the camera’s operation lamp with
the A mark on the hinge unit.
2.
Rotate the camera clockwise about
15 degrees until its operation lamp is aligned
with the B mark on the hinge unit.
If unwanted light is shining on the lens, rotate the lens
ring counterclockwise to detach it, and then attach a
lens hood.
Lens hood
A
B
Attach
Detach
Lens ring
When attaching the lens hood or lens ring, align the
8
mark on the camera with the 2 mark on the lens
hood or lens ring.