Printout problems not related to print quality, Printout has smears on the bottom edge, Printing is too slow – Epson Photo 925 User Manual

Page 94: Paper does not feed correctly, Blank pages print

Printout Problems Not Related to Print Quality

If one of the following problems has occurred, try the solutions
listed for the problem.

❏ Blank pages print

❏ Printout has smears on the bottom edge

❏ Printing is too slow

Blank pages print

❏ Run the Head Cleaning utility to clear any clogged nozzles.

Printout has smears on the bottom edge

❏ If the paper is curled toward the printable side, flatten it or

curl it slightly in the opposite direction.

❏ Set the adjust lever to the

position.

Printing is too slow

❏ Make sure that the Media Type setting in the LCD panel is

correct.

Paper Does Not Feed Correctly

If one of the following problems has occurred, try the solution(s)
listed for that problem.