Epson Photo 925 - Manual (Page 93)

91
Eng
li
s
h
❏ Set the adjust lever to the ^ position, and make sure the
Media Type setting in the LCD panel is correct.
❏ Remove each sheet from the output tray as it is printed,
especially if you are using transparencies.
❏ If you are printing on glossy media, place a support sheet (or
a sheet of plain paper) beneath the stack, or load only one
sheet at a time.
❏ When printing on thick media, set the adjust lever to the ^
position.
❏ Run the Head Cleaning utility.
❏ Load and eject dry paper several times. If the problem
persists, ink may have leaked inside the printer, so wipe the
inside of the printer with a soft, clean cloth.
w
Warning:
Be careful not to touch the gears or rollers inside the printer.
c
Caution:
Be careful not to wipe grease on the metal parts under the
print head path.
Wipe here