Epson Photo 925 - Manual (Page 91)

89
Eng
li
s
h
❏ Make sure that the position of the adjust lever is appropriate
for the media type. When printing on media of normal
thickness, set the adjust lever to the
m position. When printing
on envelopes or thick media, set the position to ^ .
Vertical misalignment or banding
Try one or more of these solutions:
❏ Make sure that the printable side of the paper is face up in the
sheet feeder.
❏ Run the Head Cleaning utility to clear any clogged ink
nozzles. “Cleaning the Print Head” on page 79.
❏ Make sure that the Media Type setting selected in the Control
Panel is appropriate for the type of media loaded in the
printer.
❏ Make sure that the position of the adjust lever is appropriate
for the media type. When printing on media of normal
thickness, set the adjust lever to the
m position. When printing
on envelopes or thick media, set the position to ^ .
Color gaps
Try one or more of these solutions:
❏ Make sure that your paper is not damaged, dirty, or too old.
Also, make sure that the printable side of the paper is face up
in the sheet feeder.
❏ Run the Head Cleaning utility to clear any clogged ink
nozzles.
“Cleaning the Print Head” on page 79.