Yaskawa YASNAC PC NC Maintenance Manual User Manual
Page 262

Chapter 8: Fixed File Operations
PC NC Maintenance Manual
8-60
AOpen Inc.”). The CPU rack reports the use of one of the following pro-
cessor types:
•
Cyrix 6x86MX-PR200 processor. BIOS reports “6x86MX-PR200
CPU Found” (the BIOS may also report “Cyrix M II/IBM
6x86MX-200 CPU Found”).
•
Intel Pentium MMX 233Mhz processor. BIOS reports “PEN-
TIUM-MMX CPU at 233MHz”.
Press the DEL or Delete key to enter the BIOS Main Setup screen. This
screen is available for only a few seconds; press the key as soon as this
screen is shown. If the key is not pressed in time, please power the unit
OFF and ON to reboot the system, or press the Ctrl-Alt-Del keys simulta-
neously to start the reboot.
Note: The mouse and touchscreen are inoperable while the CPU rack is in the BIOS setup
mode. Use only the keyboard for BIOS setup.
The arrows shown on the side of some lines on the screens are to ‘point-out’ a particular
line or area on the screen and are not part of the actual screen.
- Tag Generator (30 pages)
- MP3300iec (82 pages)
- 1000 Hz High Frequency (18 pages)
- 1000 Series (7 pages)
- PS-A10LB (39 pages)
- iQpump Micro User Manual (300 pages)
- 1000 Series Drive Option - Digital Input (30 pages)
- 1000 Series Drive Option - CANopen (39 pages)
- 1000 Series Drive Option - Analog Monitor (27 pages)
- 1000 Series Drive Option - CANopen Technical Manual (37 pages)
- 1000 Series Drive Option - CC-Link (38 pages)
- 1000 Series Drive Option - CC-Link Technical Manual (36 pages)
- 1000 Series Drive Option - DeviceNet (37 pages)
- 1000 Series Drive Option - DeviceNet Technical Manual (81 pages)
- 1000 Series Drive Option - MECHATROLINK-II (32 pages)
- 1000 Series Drive Option - Digital Output (31 pages)
- 1000 Series Drive Option - MECHATROLINK-II Technical Manual (41 pages)
- 1000 Series Drive Option - Profibus-DP (35 pages)
- AC Drive 1000-Series Option PG-RT3 Motor (36 pages)
- Z1000U HVAC MATRIX Drive Quick Start (378 pages)
- 1000 Series Operator Mounting Kit NEMA Type 4X (20 pages)
- 1000 Series Drive Option - Profibus-DP Technical Manual (44 pages)
- CopyUnitManager (38 pages)
- 1000 Series Option - JVOP-182 Remote LED (58 pages)
- 1000 Series Option - PG-X3 Line Driver (31 pages)
- SI-EN3 Technical Manual (68 pages)
- JVOP-181 USB Copy Unit (2 pages)
- JVOP-181 (22 pages)
- SI-EN3 (54 pages)
- SI-ET3 (49 pages)
- MECHATROLINK-III (35 pages)
- EtherNet/IP (50 pages)
- SI-EM3 (51 pages)
- 1000-Series Option PG-E3 Motor Encoder Feedback (33 pages)
- 1000-Series Option SI-EP3 PROFINET (56 pages)
- PROFINET (62 pages)
- AC Drive 1000-Series Option PG-RT3 Motor (45 pages)
- SI-EP3 PROFINET Technical Manual (53 pages)
- A1000 Drive Option - BACnet MS/TP (48 pages)
- 120 Series I/O Modules (308 pages)
- A1000 12-Pulse (92 pages)
- A1000 Drive Software Technical Manual (16 pages)
- A1000 Quick Start (2 pages)
- JUNMA Series AC SERVOMOTOR (1 page)
- A1000 Option DI-101 120 Vac Digital Input Option (24 pages)