Yaskawa YASNAC PC NC Maintenance Manual - Manual (Page 206)

Chapter 8: Fixed File Operations PC NC Maintenance Manual
8-4
3. Switch to the Utilities: Backup and Restore screen.
4. Select All from the Select Data list on the left.
5. The default value shown in the Filename field is the CNC serial
number, but this may be changed if desired. Parameter data can
also to be backed up to a floppy disk. To select the floppy disk
drive, touch the current directory drop down menu and select
‘a:\’.
6. Check the Skip Zero box to avoid backing up any parameter data
with a value of zero. However, checking Skip Zero is not recom-
mended.
7. Touch the Backup button.
8. A dialog box appears to confirm that the backup process must be
performed. To continue, press the Start button.