Yaskawa YASNAC PC NC Maintenance Manual - Manual (Page 245)

PC NC Maintenance Manual Chapter 8: Fixed File Operations
8-43
39. The PC NC begins to reboot and the Drive Image program
restarts.
40. Click the Exit button to close the Drive Image window.
41. Exit to the DOS prompt.
42. Insert the Power Quest SID Changer disk into the floppy disk
drive unit.
43. Using the keyboard, type ‘sidchngr 0 \winnt /r’ and press Enter.
44. The SID changer begins changing SID in Windows NT.
45. Return to the DOS prompt when SID has been changed.
46. Power OFF the PC NC.
47. Take the SID changer floppy out of the floppy disk drive unit.
Remove the external CD ROM drive unit from the LPT1 port.
48. Power ON the PC NC.
49. The PC NC screen should come up. If the screen does not appear,
the hard disk may be defective; contact Yaskawa customer ser-
vice.