Yaskawa YASNAC PC NC Maintenance Manual - Manual (Page 238)

Chapter 8: Fixed File Operations PC NC Maintenance Manual
8-36
• Select “BIOS FEATURES SETUP”. Press the Enter key.
• Select “Boot Sequence” item. The default setting is “C,A,SCSI”.
Change this setting to “A,C,SCSI” using the “Page Up” or “Page
Down” keys.
• Press the Esc key to return to the Main Setup screen.
• Select SAVE & EXIT SETUP and press the Enter key.
• Press the Y key to save the BIOS setup changes and exit the BIOS
setup utility.
• The system automatically reboots from the floppy disk.
9. The PowerQuest Drive Image window appears.