Yaskawa VS606 V7 to V1000 - Manual (Page 7)

PL.V1000.01 Transition Guide 4/1/09
Page 7 of 38
Yaskawa Electric America, Inc.
Product Transition Guide
PL. V1000.01 Rev: 4/1/09
1.4 Terminals
Main Circuit Terminals <1>
• As the V7 and V1000 may have different terminals sizes (depending on capacity), the terminals must be carefully
checked before replacement (see Section 1-4). <1>
• The main terminal functionality has not been changed between the V7 and the V1000 drive.
Control Terminals, Signal Levels
• The V7 and V1000 initial settings for terminal function are shown below.
• "—" indicates that an equivalent terminal on the other unit does not exist.
Main Terminals
Note
V7 V1000
R/L1 R/L1
Power supply connection S/L2 S/L2
T/L3 T/L3
U/T1 U/T1
Drive output V/T2 V/T2
W/T3 W/T3
B1 B1 Braking resistor or external braking unit connection <1>
B2 B2 Braking resistor connection
+1 +1 DC Choke connection, DC power supply input
+2 +2 DC Choke connection
— — DC power supply input, external braking unit connection <1>
Ground <1>
Control
Terminals
Function
Signal Level
V7 V1000 V7 V1000
S1
Multi-Function input 1
(1: Run forward 0: Stop) <1>
Photocoupler 24 VDC, 8A
isolation <1>
Photocoupler 24 VDC, 8A <1>
S2
Multi-Function input 2
(1: Run reverse 0: Stop) <1>
S3
Multi-Function input 3
(External fault) <1>
S4
Multi-Function input 4
(Fault reset) <1>
S5
Multi-Function input 5
(Multi-step speed 1) <1>
S6
Multi- Function input 6
(Multi-step speed 2) <1>
S7
Multi-Function input 7
(JOG reference) <1>
SC Multi-Function input common <1> — —
RP
Pulse input
(frequency reference) Frequency range:
1.0~32 kHz <1>
Frequency range:
0.5~32 kHz <1>
FS +V Analog input power supply +12 V (max. current 20 mA) +10.5 V (max. current 20 mA)