Yaskawa DriveWizard Plus - Manual (Page 7)

7
1 System Overview
This section provides an overview of DriveWizard Plus and various features of the software
1.1 DriveWizard Plus Overview and Functions
DriveWizard Plus is a powerful engineering tool designed for advanced application setup and for
performing maintenance tasks on a Yaskawa drive.
The advanced functionality of DriveWizard Plus assists all users with powering up the drive, test
running the application, or performing maintenance.
Main functions:
・
Editing parameters while taking advantage of useful help information
・ Displaying drive operation status (I/O signals, internal status information, etc.) as well as product
information
・ Troubleshooting features, including possible causes for problems and other help options
・ Test running the drive and application (both manual and pattern operation)
・ Auto-Tuning features to optimize parameter settings
・ Oscilloscope function.
NOTE: Some DriveWizard Plus functions may not be applicable for the specific drive model
being used. Such functions will not be available when displayed in the menu toolbars.
There are two ways to connect the drive to DriveWizard Plus.
Normal Connection (Drive Only)
Connects the drive directly to DriveWizard Plus using an RS-232C communications cable.
To connect a different drive, unplug the communications cable from the drive that is currently
connected and connect it to the other drive.
Controller Connection
DriveWizard Plus can also operate a drive running from an upper controller using a
MECHATROLINK communication cable.
Connecting DriveWizard Plus to an upper controller makes it possible for DriveWizard Plus to
operate multiple drives running on the same network, without needing to switch or connect new
serial communication cables.