Yaskawa DriveWizard Plus - Manual (Page 33)

33
2.5.1 Starting DriveWizard Plus
Is DriveWizard
Plus open?
NO
① Starting DriveWizard Plus
② Connection status display
④ Select a Project File.
YES
Successfully
connected? *4
YES
NG
⑤ Start DriveWizard Plus
Is the drive
connected? *4
NO
YES
Drive connection
If there is no communication data set, DriveWizard
Plus will use default com settings.
Open an existing Project *2 No Project specified *3 Open a New Project *1
⑥ Active DriveWizard Plus application
*1 New Project ： DriveWizard Plus creates a new Project file and automatically assigns default values to all parameters.
The Project must be given a name when it is saved.
*2 Pre-existing Project ： The user selects a Project that was saved earlier.
*3 No Project No Project file is opened. No data will be displayed and no parameters can be edited.
・
No child windows (such as the Parameter Edit window, etc.) will be displayed.
・ If any docking windows are open, they will not display any data or drive model information.
Software functions will become enabled once a Project is opened or once DriveWizard Plus connects to the drive.
*4 Once a Project has been opened, double check that the drive model information is correct.
Successfully
connected? *4
YES
Communications error
Drive model
data invalid
A
A
*Returns to the screen for opening
a previously saved Project.
B
A
NO NO