Yaskawa DriveWizard Plus - Manual (Page 64)

64
Editing a numeric value
Single-click or double-click on the value you want to change, and then enter the new setting.
Editing the value selected
Select the item from the drop-down menu, or enter the new value directly into the line provided.
Editing the Control Mode
Below is an example of editing the control mode or parameters that depend on the control mode. The
Edit window will appear by double-clicking on a parameter row, or by selecting “Control Method
Selection” from the parameter list, then clicking the
icon.
Either select the setting value from the List Box, or enter the value directly. Any parameters that are
affected when the control mode is changed will be displayed in this list.
Click “OK” to accept all of these related changes, or click “Cancel” if you decide you do not want to make
the changes listed in the window. DriveWizard Plus will return to the Parameter Edit Screen.