Yaskawa DriveWizard Plus - Manual (Page 19)

19
2.3 Connecting the Drive and PC
When the “Media” connection setting discussed in the previous section is set for search detection,
DriveWizard Plus will automatically search all serial ports for any connections.
If DriveWizard Plus detects that more than one drive is connected, the following window will appear,
showing the models and addresses of all drives that are connected.
NOTE: This window will only appear when more than one drive is connected.
Use the window above to select which drive the current session of DriveWizard Plus will focus on
and click “OK”. Clicking on “Cancel” will cause the following window to appear:
If DriveWizard Plus is unable to communicate with the drive, the window above will not appear and
the following message will be displayed instead:
Regardless of whether the drive is connected to the PC, this message may appear if DriveWizard
Plus is unable to properly communicate with the drive.