Yaskawa DriveWizard Plus - Manual (Page 48)

48
(4) Connect Menu
SUBMENU DESCRIPTION
Connect Inverter (C)… Connects the drive to the PC.
*If already connected, this selection will read, “Reconnect (R)”.
Disconnect Inverter Disconnects the drive that is currently connected.
*This selection is only available when a drive is connected.
(5) Tool Menu
SUBMENU DESCRIPTION
DriveWorksEZ (E) Opens DriveWorksEZ.
*Requires that DriveWorksEZ be installed separately.
Drive Replacement (R) For updating or replacing a drive with a different model.
(6) Help Menu
SUBMENU DESCRIPTION
DriveWizard Plus Manual (M) … Opens the instruction manual for DriveWizard Plus.
Inverter Help (I) … Offers Help information on various drives.
Version Data (A)… Displays the version of DriveWizard Plus currently installed.
(7) Edit Menu (Parameter Edit)
Submenu Description
Write selected parameters (S) Writes the value for the selected parameters to the drive.
Write group (G)… Writes the setting values for the entire group of parameters selected to the drive.
Select All Parameters (A) Writes the setting values for all parameters to the drive.
Read selected parameters (E) Read the parameters selected from the drive that is connected.
Read Group (R)… Reads the specified group of parameters from the drive.
Read All Parameters (L) Reads all parameters from the drive.
Drive initialized (I)… Initializes the drive.
Drive Compare (C) Compares parameters settings in the current Project with parameter settings stored in
the drive that is connected. This option is disabled when no drive is connected.
File Compare (F)… Compares the parameter settings in the current Project with another Project or
parameter file.
Comment Edit (D) Opens the Comment Edit window.