Yaskawa DriveWizard Plus - Manual (Page 47)

47
(3) Display Menu
SUBMENU SELECTION DESCRIPTION
Function Tree ○ Displays the Function Tree.
Direct Parameter Edit ○ Opens the Direct Parameter Edit window.
All Monitors ○ Displays all monitors.
User Monitor ○ Displays user monitors only.
I/O Monitor ○ Displays the input and output monitors.
Status Monitor ○ Displays the Status Monitor.
Operation Monitor ○ Displays the Operation Monitor.
Manual Operation ○ Displays the window for performing Manual Run.
*This function cannot be used when connected to an upper controller.
Pattern Operation ○ Displays the window for performing Pattern Run.
*This function cannot be used when connected to an upper controller.
Troubleshooting ○ Shows the Troubleshooting window.
Results List ○ Displays the results after comparing parameters.
Drive Replacement ○ Displays the function for replacing the drive with a different model.
Conversion Results ○ Displays the results after performing a Parameter Conversion.
Motor Parameter Auto-Tuning － Begins the Auto-Tuning process.
Visual Monitor － Displays the Visual Monitors.
*Exclusive functions for the V1000 and J1000 series
Parameter Edit － Opens the window for editing parameters.
Oscilloscope － Displays the Oscilloscope window.
Toolbar (T) － Displays or hides the toolbar.
Standard (S) ○ Displays or hides the standard toolbar.
Parameter Edit (E) ○ Displays or hides the toolbar for editing parameters.
Oscilloscope (O) ○ Displays or hides the Oscilloscope toolbar.
Customize (C)… － Opens the window for customizing the menu and toolbar.
Language *2 － For selecting which language to display.
English － Displays English only.
English is not displayed when English has been selected.
Japanese － Displays Japanese language settings.
Japanese is not displayed when Japanese has been selected.
*2: Changing the Language Selection requires restarting DriveWizard Plus. Available languages
differ dependent on software versions.