Yaskawa CM013 V7 DeviceNet Option - Manual (Page 51)

Cable Specification 5-2
Cable Specifications
‹
Thick Cable
This cable consists of two shielded pairs of wire twisted on a common axis with a drain wire in the center. It is covered with an overall braid
shield.
„
One 18AWG twisted pair signal wire (Blue & White)
„
One 15AWG twisted pair power wire (Red & Black)
„
Separate aluminized mylar shields around the signal and power wires
„
Overall foil/braid shield with 18AWG drain wire
‹
Thin Cable
This cable consists of two shielded pairs of wire twisted on a common axis with a drain wire in the center. It is covered with an overall braid
shield.
„
One 24AWG twisted pair signal wire (Blue & White)
„
One 22AWG twisted pair power wire (Red & Black)
„
Separate aluminized mylar shields around the signal and power wires
„
Overall foil/braid shield with 22AWG drain wire
Table 5.1 – DeviceNet Thick Cable
Belden Wire & Cable Co.
Part # Pair AWG Insulation Outer Jacket Color
3082A
Data 18 Datalene
PVC Lt. Gray
Power 15 PVC/Nylon
3083A
Data 18 Datalene
PVC Yellow CPE
Power 15 PVC/Nylon
Berk-Tek.
Part # Pair AWG Insulation Outer Jacket Color
210051
Data 18 FPE/HDPE
PVC Lt. Gray
Power 15 PVC/Nylon
Table 5.2 – DeviceNet Thin Cable
Belden Wire & Cable Co.
Part # Pair AWG Insulation Outer Jacket Color
3084A
Data 24 Datalene
PVC Lt. Gray
Power 22 PVC/Nylon
3085A
Data 24 Datalene
PVC Yellow CPE
Power 22 PVC/Nylon
Berk-Tek.
Part # Pair AWG Insulation Outer Jacket Color
210144
Data 24 FPE/HDPE
PVC Lt. Gray
Power 22 PVC/Nylon