Configure the v7 drive on the network, Select drive properties, Upload drive parameters – Yaskawa CM013 V7 DeviceNet Option User Manual

Page 16: Configure the v7 drive on the network -11

Text mode
Original mode

Installation 1-11

Configure the V7 Drive on the Network

Select Drive Properties

After the appropriate EDS file has been loaded and the drive is recognized by the network, highlight the drive, right click on it and select
Properties.

Fig 1.12 – Select Drive Properties

Upload Drive Parameters

Select the Parameters tab and Upload the parameters from the drive.

Fig 1.13 – Upload Drive Parameters

This manual is related to the following products:

CM013 V7 DeviceNet