SMA SMC 4600A Installation - Manual (Page 69)

SMA Solar Technology AG Decommissioning
Installation Manual SMC46-60A11-IA-en-81 69
7. Remove the inverter by lifting it up and out of the
wall mounting bracket.
8. Use the side handles (above and below) or a steel
rod (maximum diameter 30 mm) to transport the
inverter. The rod must be pushed through the
enclosure openings.
☑ The inverter is dismounted.
10.2 Packing the Inverter
If possible, always pack the inverter in its original packaging. If this is no longer available, you can
also use an equivalent carton. The carton must be completely closeable, have a handle system and
be designed to support both the weight and size of the inverter.
10.3 Storing the Inverter
Store the inverter in a dry place where ambient temperatures are always between −25°C and +60°C.
10.4 Disposing of the Inverter
Dispose of the inverter at the end of its service life in accordance with the current locally applicable
disposal regulations for electronic waste. Alternatively, send it back to SMA Solar Technology AG
with shipping paid by sender, and labelled "FOR DISPOSAL" ("ZUR ENTSORGUNG")
(contact see Page 80).