SMA SMC 4600A Installation - Manual (Page 58)

Troubleshooting SMA Solar Technology AG
58 SMC46-60A11-IA-en-81 Installation Manual
9 Troubleshooting
If the inverter displays blink codes or error messages which differ from those described below, contact
the SMA Service Line.
You will find a description of display messages during operation, status messages and measurement
channels in the user manual provided.
Do not perform any repairs that are not described here and take advantage of the 24-hour
replacement service (inverter ready for shipping and handed over to a freight-forwarding company
within 24 hours) and the SMA Solar Technology AG repair service instead.
9.1 Blink Codes
Green Red Yellow Status
Flashing flashing flashing OK (start-up phase)
Permanently glowing is not glowing is not glowing OK (feed-in operation)
permanently glowing is not glowing Earth fault or varistor
defective
permanently glowing OK (initialisation)
Is flashing quickly
(3 x per second) is not glowing is not glowing OK (stop)
permanently glowing is not glowing Earth fault or varistor
defective
Is flashing slowly
(1 x per second) is not glowing is not glowing OK (waiting, grid
monitoring)
Goes out briefly
(approx. 1 x per
second) permanently glowing is not glowing Earth fault or varistor
defective
is not glowing is not glowing OK (derating)
Is not glowing is not glowing is not glowing OK (night-time
deactivation or
Electronic Solar Switch
not connected)
is glowing / flashing Disturbance
permanently glowing is not glowing Earth fault or varistor
defective
is glowing / flashing Earth fault or varistor
defective and
disturbance