SMA SMC 4600A Installation - Manual (Page 26)

Electrical Connection SMA Solar Technology AG
26 SMC46-60A11-IA-en-81 Installation Manual
5.3 Setting the Display Language
You can set the language of the display using the switches at the bottom of the display assembly inside
the inverter.
When selecting the display language, different switching settings apply to inverters that are set to the
Italian national standard CEI 0-21. You can see the standard to which the inverter was set upon
delivery on the type label and on the included supplementary sheet with the default settings. For more
information, see the Technical Description "Operating Parameters" at www.SMA-Solar.com.
Procedure
1. Open the inverter as described in Section 7.2 "Opening the Inverter" (page 48).
2. Set the switches to the required language.
The following switch settings, except for CEI 0-21,
apply to all national standards:
The following switch settings apply to inverters
which are set to the national standard CEI 0-21:
3. Close the inverter as described in Section 7.3 "Closing the Inverter" (page 51).
☑ The display language is set.
Language Rotary switch
S2 Rotary switch
S1
German B B
English B A
French A B
Spanish A A
Language Rotary switch
S2 Rotary switch
S1
Italian B A
English A A
German B B
French A B