SMA SMC 4600A Installation - Manual (Page 19)

SMA Solar Technology AG Assembly
Installation Manual SMC46-60A11-IA-en-81 19
4. Screw the inverter onto the wall mounting bracket
on both sides using the screws (M6x8) provided.
Only tighten the screws hand-tight.
5. Check to ensure that the inverter is securely in
place.
6. Close the recessed grips using the ventilation grids
supplied. To help you identify the sides, the
ventilation grids are marked on the inside with
"rechts/right" and "links/left".
The ventilation grids prevent intrusion of dust
and insects, and can be reordered from
SMA Solar Technology AG as required
(see Section 13 "Contact" (page 80)).
Optional Anti-Theft Protection
To protect the inverter against theft, the back
panel can be secured to the wall at the bottom
using two "safety screws".
The other two holes are spares.