SMA Communit-10 User Manual
Page 34
7 Commissioning the Communit
SMA Solar Technology AG
34
Communit-IA-A1-en-22
Installation Manual
6. Enter the data of your internet provider in the area Internet Settings:
• Ensure that the correct type of Internet connection is selected in the drop-down list of the field Internet Service.
• Select [Set].
• If you use UMTS/GPRS as Internet connection, enter the APN of the Internet provider in the field APN / Phone
Number.
• Enter the user name for Internet access in the field Username. The user name is provided by the Internet provider.
• Enter the password for Internet access in the field Password. The password is provided by the Internet provider.
• Re-enter the password for confirmation in the field Verify password.
• Select [SAVE].
7. If your SIM card is protected with a PIN, select Connectivity Settings > Modem Settings in the menu.
8. Activate the checkbox SIM-PIN.
9. Enter the PIN of the SIM card in the field PIN.
10. Re-enter the PIN for confirmation in the field Verify PIN.
11. Select [SAVE].
12. Activate the monitoring of the digital inputs 1/2 in order to allow an e-mail to be sent in the event of a redundant
power supply unit fault:
• Select I/O Settings in the menu.
• Activate the checkbox Activate.
• In the drop-down list Signal action, select the value Alarm - Send E-Mail.
• If necessary, enter the e-mail text in the field Message.
• Select [SAVE].
13. Restart the router:
• Select Home in the menu.
• Select [REBOOT].
☑ The router will save the set data and restart.