SMA Communit-10 - Manual (Page 16)

5 Mounting SMA Solar Technology AG
16 Communit-IA-A1-en-22 Installation Manual
Procedure:
1. Mark the positions of the mounting holes on the wall.
2. Drill the mounting holes.
3. Insert screw anchors, if necessary.
4. Tighten the screws with washers in the screw anchors. The screws must protrude 10 mm from the wall.
5. Hang the Communit on the screws and align.
6. Tighten all screws.
7. Ensure that the Communit is firmly positioned.
8. Ensure that all connectors inside the Communit are firmly positioned.
&$87,21
Risk of injury due to inappropriate transport or mounting of the product
The product is heavy. If you try to move the product on your own, you run a risk of being injured. The maximum product
weight is 45 kg.
• Always have two persons transport and mount the product.
• Wear suitable personal protective equipment for all work on the device.